Tubing Connectors and Fittings
NEW JERSEY FLUID SYSTEMS LLC SS TUBE FITTING F CNCTR 1/16IN
NC2467585 SS TUBE FITTING F CNCTR 1/16IN
MSC SMC PNEUMATICS KQ2L07-00A 1/4" OD, Brass/Polybutylene Push-to-Connect Union Elbow 145 Max psi
SMC PNEUMATICS KQ2L07-00A 1/4" OD, Brass/Polybutylene Push-to-Connect Union Elbow 145 Max psi
Chemglass Life Sciences 24/40 Inner Joint with Hooks, on 22mm OD x 1.8mm W tubing
Inner joint with two hooks 180º apart just above the grind. 24/40 Inner Joint with Hooks, on 22mm OD x 1.8mm W tubing.
Chemglass Life Sciences 45/50 Drip Joint, 16in OAL, on 41mm OD x 2mm W tubing
45/50 Drip Joint, 16in OAL, on 41mm OD x 2mm W tubing. Standard taper inner and outer lengths tooled on longer lengths or different sizes than normally available under part numbers CG-100 through CG-105. These joints offer the glassblower the opportunity to construct apparatus made of heavier tubing or without unnecessary seals.
Chemglass Life Sciences Adapter, Inlet, Straight, 24/40 Joint Size, Hose Connection
Adapter, Inlet, Straight, 24/40 Joint Size, Hose Connection. With serrated hose connection having an O.D. of 10mm at the largest serration sealed between the top outer and lower inner standard taper joints.
Chemglass Life Sciences Adapter, Inert Gas, 29/42 Inner Joint
Adapter, Inert Gas, 29/42 Inner Joint. Adapter has two hose connections 180º from one another to permit a flow of inert gas over the apparatus. Hose connection has an O.D. of 10mm at the largest serration.
Chemglass Life Sciences Adapter, Inlet, Bleed Tube, 7mm OD X 265mm OAL
Adapter, Inlet, Bleed Tube, 7mm OD X 265mm OAL. For the introduction of gases or liquids during reactions. Bleed tube is 7mm OD X 265mm overall length with a tapered delivery end and capillary tip.
Chemglass Life Sciences 75/50 Ball Joint, Clamp Size: 75, Tubing OD: 56mm
75/50 Ball Joint, Clamp Size: 75, Tubing OD: 56mm. Made to ASTM Specifications E677. See CG-145-B and CG-150 for clamps.
Chemglass Life Sciences Adapter, Inert Gas, 19/22 Inner Joint
Adapter, Inert Gas, 19/22 Inner Joint. Adapter has two hose connections 180º from one another to permit a flow of inert gas over the apparatus. Hose connection has an O.D. of 10mm at the largest serration.
Chemglass Life Sciences 35/20 Ball Joint, Clamp Size: 35, Tubing OD: 21.70-22.30mm
35/20 Ball Joint, Clamp Size: 35, Tubing OD: 21.70-22.30mm. Made to ASTM Specifications E677. See CG-145-B and CG-150 for clamps.
Chemglass Life Sciences Flange, Reaction Kettle, 100mm I.D., With O-Ring Groove
Flange, Reaction Kettle, 100mm I.D., With O-Ring Groove. Flange is formed with a groove in the flat portion of the mating surface to accept an O-Ring. The flange also has a ground surface, permitting assembly with either the CG-148 flat flange or CG-149 lid blank using grease. In the greased application, the O-Ring groove prevents grease from entering the reaction kettle and causing possible contamination. Outer taper of flange is formed at a 45º angle to accept the CG-141 clamp.
Chemglass Life Sciences Flange, Reaction Kettle, 120mm I.D., With O-Ring Groove
Flange, Reaction Kettle, 120mm I.D., With O-Ring Groove Flange is formed with a groove in the flat portion of the mating surface to accept an O-Ring. The flange also has a ground surface, permitting assembly with either the CG-148 flat flange or CG-149 lid blank using grease. In the greased application, the O-Ring groove prevents grease from entering the reaction kettle and causing possible contamination. Outer taper of flange is formed at a 45º angle to accept the CG-141 clamp.
Chemglass Life Sciences Flange, Reaction Kettle, 200mm I.D., With O-Ring Groove
Flange, Reaction Kettle, 200mm I.D., With O-Ring Groove. Flange is formed with a groove in the flat portion of the mating surface to accept an O-Ring. The flange also has a ground surface, permitting assembly with either the CG-148 flat flange or CG-149 lid blank using grease. In the greased application, the O-Ring groove prevents grease from entering the reaction kettle and causing possible contamination. Outer taper of flange is formed at a 45º angle to accept the CG-141 clamp.
MSC SMC PNEUMATICS KQ2H07-34AS 1/4" OD, 1/8 NPT, Brass/Polybutylene Push-to-Connect Male Connector 145 Max psi
SMC PNEUMATICS KQ2H07-34AS 1/4" OD, 1/8 NPT, Brass/Polybutylene Push-to-Connect Male Connector 145 Max psi